Roland TU-70, TU-60, TU-500, TU-400 user manual Hands or hair may become caught

Do not use with a damaged power cord or a power outlet that is loose when the AC adapter is plugged in.

Use with any other power supply may lead to fire or electrocution.

Installation of the control box for the TU is a task which must be carried out by two or more persons.

Injury may result if attempted by one person without assistance.

Roll material must be placed at a predetermined shaft position.

Failure to do so may allow the material to fall, leading to injury.

*For detailed information on loading material, please refer to the CJ/FJ user's manual.

Do not attempt to change a roll material while the power remains switched on.

The take-up motor may be activated unexpectedly while changing the roll, leading to injury. The power must be switched off before attempting to change the material.

When not in use for extended periods, unplug the power cord from the electrical outlet.

Failure to do so may result in danger of shock, electrocution, or fire due to deterioration of the electrical insulation.

To secure the part in place, use the bolt included with the unit.

A loose bolt or use of other than the specified bolt may result in the falling of the part, leading to injury.

Removal of taken-up roll material from the TU is a task which must be carried out by two or more persons.

Injury may result if attempted by one person without assistance.

Do not allow the hands or hair to touch the paper tube, flange, or sheet during take-up.

The hands or hair may become caught.

3