Roland TU-400, TU-60, TU-70, TU-500 user manual Securing the Material in Place

Securing the Material in Place

Forward Take-up (FORWARD)

The printed surface is moved to the outer side and taken up

Pull out material so that it is perpendicular to the paper

1 tube.

To prevent the pulled-out material from becoming

2 crooked, secure with tape at the two edges and center, as shown in the figure.

Front

Pull out the material and ensure a certain amount of slack,

3 as shown in the figure. Move the sheet loading lever to secure the material in place.

Move the [MANUAL] switch to the [FORWARD] setting and take up one turn's worth of material.

4 After take-up, maintain slack as shown in the figure to keep the material from being drawn taut by take-up.

Front <---

Backward Take-up (BACKWARD)

The printed surface is moved to the inner side and taken up

Pull out material so that it is perpendicular to the paper

1 tube.

To prevent the pulled-out material from becoming

2 crooked, secure with tape at the two edges and center, as shown in the figure.

Front

13