115

Creating a Patch

Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix

Patch TVA Env

A-Env T1 V-Sens

(TVA Envelope Time 1 Velocity Sensitivity)

This allows keyboard dynamics to affect the Time 1 of the
TVA envelope. If you want Time 1 to be speeded up for
strongly played notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set this to a negative
(-) value.

Value:

-63– +63

A-Env T4 V-Sens

(TVA Envelope Time 4 Velocity Sensitivity)

The parameter to use when you want key release speed to
control the Time 4 value of the TVA envelope. If you want
Time 4 to be speeded up for quickly released notes, set this
parameter to a positive (+) value. If you want it to be slowed
down, set this to a negative (-) value.

Value:

-63– +63

A-Env Time KF

(TVA Envelope Time Keyfollow)

Use this setting if you want the TVA envelope times (Time 2–
Time 4) to be affected by the keyboard location. Based on the
TVA envelope times for the C4 key (center C), positive (+)
settings will cause notes higher than C4 to have increasingly
shorter times, and negative (-) settings will cause them to
have increasingly longer times. Larger settings will produce
greater change.

Value:

-100, -90, -80, -70, -60, -50, -40, -30, -20, -10, 0,
+10, +20, +30, +40, +50, +60, +70, +80, +90, +100

fig.06-031.e

A-Env Time 1–4 (TVA Envelope Time 1–4)

Specify the TVA envelope times (Time 1– Time 4). Higher
settings will lengthen the time until the next volume level is
reached. (For example, Time 2 is the time over which Level 1
will change to Level 2.)

Value:

0–127

A-Env Level 1–3 (TVA Envelope Level 1–3)

Specify the TVA envelope levels (Level 1–Level 3). These
settings specify how the volume will change at each point,
relative to the standard volume (the Tone Level value
specified in the TVA screen).

Value:

0–127

fig.06-041.e
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Key
Time
T1 T2 T3 T4
L3
L1 L2
Note off
Level
Time
Note on
T: Time L: Level
VS-700_r_e.book 115 ページ 2008年11月20日 木曜日 午後2時28分