68
SURROUND Section
The SURROUND section lets you control surround bus parameters on the selected channel strip.
fig.34.eps
A.
Surround joystick panner (Angle and Focus)
B.
[LFE SEND] Level knob (or FR-Balance when [SHIFT] button is pressed)
C.
[VIEW] button (open surround panner in SONAR)
D.
[V-LINK] button
The SURROUND section contains the following controls.
You can also use the T-Bar to control Front/Rear-Balance (refer to
“T-Bar Section”
(p. 69)).
You can move the active window in SONAR by holding down the [COMMAND] modifier button and moving the Surround
Panner (move the joystick until it “catches” the window).
Interface Explanation
Surround joystick panner
Controls the Surround Panner of the selected channel strip. The joystick X-Y position
simultaneously controls the Angle and Focus parameters in SONAR. When controlling
non-surround channels, the X axis controls pan.
LFE SEND
Adjusts value of LFE Send on the selected channel strip’s surround panner. To control
FRBalance (Front/Rear), hold down the SHIFT modifier while you adjust the LFE SEND
knob.
VIEW
Opens the Surround Panner window in SONAR.
V-LINK
Enables the V-Link protocol. (p. 169)

B C D

A

VS-700_r_e.book 68ページ 2008年11月20日 木曜日 午後2時28分