Roland VS-700 Specifying the tracks and buses that can be controlled from the VS-700 console

45
CHANNEL STRIP Section
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
The tracks and buses that can be controlled from the VS-700 console will match the tracks and buses that can be
controlled from SONAR’s track view or console view. If desired, you can also control all tracks and buses in the project.
1.
On SONAR’s “Options” menu, click “Controllers/Surfaces” to open the “Controllers/Surfaces”
dialog.
2.
Under “Control Strips Visible in”, select one of the following:
fig.13-2.eps
Once a change is made, the VS-700C Console is updated immediately.
3.
Click “Close.”
Specifying the tracks and buses that can be controlled from the
VS-700 console
Explanation
Track View
Control the tracks/buses shown in SONAR’s Track view.
Console View Control the tracks/buses shown in SONAR’s Console view.
All Strips
If you want the VS-700C Console to always show all tracks and buses in the project,
regardless if any tracks or buses are hidden in SONAR’s Track view or Console view.
VS-700_r_e.book 45ページ ２００８年１１月２０日 木曜日 午後２時２８分