135
Creating a Rhythm Set
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix

Rhythm Output

Rhythm Out Assign

Specifies for each rhythm set how the direct sound will be
output.
Value:
MFX:
Output in stereo through multi-effects. You can
also apply chorus or reverb to the sound that
passes through multi-effects.
L+R:
Output in stereo without passing through multi-
effects.
L, R:
Output in mono without passing through multi-
effects.

Tone Out Assign

Specifies how the direct sound of each tone will be output.
Value:
MFX:
Output in stereo through multi-effects. You can
also apply chorus or reverb to the sound that
passes through multi-effects.
L+R:
Output in stereo without passing through multi-
effects.
L, R:
Output in mono without passing through multi-
effects.
* If the Rhythm Output Assign is set to anything other than
“TONE,” these settings will be ignored.
* Chorus and reverb are output in mono at all times.
* The output destination of the signal after passing through
the chorus is set with the Chorus Output Select (p. 147).

Tone Out Level

Set the level of the signal that is sent to the output
destination specified by Patch/Tone Output Assign.
Value:
0–127

Tone Chorus Send

(Send Level (Output=MFX))
Specifies the level of the signal sent to the chorus for each
tone if the tone is sent through MFX.
Value:
0–127

Tone Reverb Send

(Send Level (Output=MFX))
Specifies the level of the signal sent to the reverb for each
tone if the tone is sent through MFX.
Value:
0–127

Tone Chorus Send

(Send Level (Output=non MFX))
Sets the level of the signal sent to chorus for each tone if the
tone is not sent through MFX.
Value:
0–127

Tone Reverb Send

(Send Level (Output=non MFX))
Sets the level of the signal sent to reverb for each tone if the
tone is not sent through MFX.
Value:
0–127
Output Settings
VS-700_r_e.book 135 ページ 2008年11月20日 木曜日 午後2時28分