123
Creating a Patch
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
Opening and Closing the Filter
CUTOFF:
Changes the cutoff frequency.
RESONANCE:
Emphasizes the overtones in the region
of the cutoff frequency, adding character
to the sound.
Changing the Volume, Pan, and Pitch
LEVEL:
Changes the volume level.
PAN:
Changes the pan.
PITCH:
Changes the pitch.
Changing How the Effects Are Applied
OUTPUT LEVEL:
Changes the volume of output levels.
CHORUS SEND:
Changes the amount of chorus.
REVERB SEND:
Changes the amount of reverb.
Applying LFO to Modulate Sounds
LFO1/LFO2 PCH DEPTH:
Changes the vibrato depth.
LFO1/LFO2 TVF DEPTH:
Changes the wah depth.
LFO1/LFO2 TVA DEPTH:
Changes the tremolo depth.
LFO1/LFO2 PAN DEPTH:
Changes the effect that the LFO
will have on pan.
LFO1/LFO2 RATE:
Changes the LFO cycle rate.
Changes the speed of the LFO
cycles.
The speed will not change
if LFO Rate is set to “note.”
Changing the Pitch Envelope
PIT ENV A-TIME:
Changes the Env Time 1 parameter of
the pitch envelope.
PIT ENV D-TIME:
Changes the Env Time 2 and Env Time 3
parameters of the pitch envelope.
PIT ENV R-TIME:
Changes the Env Time 4 parameter of
the pitch envelope.
Changing the TVF Envelope
TVF ENV A-TIME:
Changes the Env Time 1 parameter of
the TVF envelope.
TVF ENV D-TIME:
Changes the Env Time 2 and Env Time 3
parameters of the TVF envelope.
TVF ENV R-TIME:
Changes the Env Time 4 parameter of
the TVF envelope.
Changing the TVF Envelope
TVA ENV A-TIME:
Changes the Env Time 1 parameter of
the TVA envelope.
TVA ENV D-TIME:
Changes the Env Time 2 and Env Time 3
parameters of the TVA envelope.
TVA ENV R-TIME:
Changes the Env Time 4 parameter of
the TVA envelope.
Splitting Tones That Are Played
TMT
If the Matrix Control is used to split tones, set the TMT
Vel Control parameter to “OFF,” and the TMT Control
Switch parameter to “ON” (p. 104, p. 105).
If the Matrix Control is used to split tones, we
recommend setting the Matrix Control Sens to “+63.”
Selecting a lower value may prevent switching of the
tones. Furthermore, if you want to reverse the effect, set
the value to “-63.”
If you want to use matrix control to switch smoothly
between tones, use the Velo Fade Lower and Velo Fade
Upper parameters (p. 104). The higher the values set,
the smoother the switch is between the tones.
VS-700_r_e.book 123 ページ 2008年11月20日 木曜日 午後2時28分