•On a 6.1/7.1 system with a DTS- ES disc. Press the SUR+ button on the re- mote, then use the +/– buttons to step through three optional modes: DTS 2.0 channel downmix, DTS 5.1, or DTS-ES 6.1ch/7.1ch playback. On the front panel, press the DTS Neo:6 button while playing a DTS source to step through the same options.
•On a 6.1/7.1 system with a DTS 96/ 24 disc. Press the SUR+ button on the remote, then use the +/– buttons to step through the optional modes: DTS 2.0 chan- nel downmix, DTS 96, or DTS 96 with Rotel XS center back processing. You can also repeatedly press the DTS Neo:6 button on the front panel until the desired option is selected.
MPEG Multichannel discs
MPEG decoding is auto-detected and cannot be overridden. You may, however, select a 2 channel downmix of 5.1 channel recordings. If the system is configured with center back speaker(s), you can also force Rotel XS pro- cessing on or off.
NOTE: In addition to the options that follow, you can press the 2CH button on the remote to toggle between 2-channel downmix and multichannel playback.
•On a 5.1 system. Press the SUR+ but- ton on the remote, then press the +/– but- tons to change between MPEG 5.1 chan- nel or MPEG 2.0 channel downmix play- back.
•On a 6.1/7.1 system. Press the SUR+ button on the remote, then use the +/– but- tons to step through the optional modes: MPEG 2.0 channel downmix, MPEG 5.1 channel, MPEG with Rotel XS center back processing, MPEG with Pro Logic IIx Mu- sic center back processing, or MPEG with Pro Logic IIx Cinema center back processing (available only for 7.1 channel systems). Selecting MPEG 5.1 forces the center back channel processing off for conventional 5.1 channel playback. You can also repeatedly press the DSP button on the front panel until the desired option is selected.
29
Digital Stereo discs 
(PCM, MP3, and HDCD)
This group of recordings includes any non-Dolby Digital 2-channel signal from the RSX-1056’s digital inputs. You can play these recordings in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo, 7-CH Stereo modes. You can also use Dolby Pro Logic II matrix surround (5.1 ch systems), Dolby Pro Logic IIx Music (6.1/7.1 ch systems), Dolby Pro Logic IIx Cinema (6.1/7.1 ch sys- tems), DTS Neo:6 surround, or one of the MUSIC 1-4 DSP modes.
All of the bass management settings (speaker size, subwoofer, and crossover) are in effect with digital stereo inputs.
NOTE: In addition to the options that follow, you can select 2-channel, Pro Logic II Cin- ema (for 5.1 ch systems), Pro Logic II Music (for 5.1 ch systems), Pro Logic IIx Music (for 6.1/7.1 ch systems), Pro Logic IIx Cinema (for 7.1 ch systems), 5-channel stereo, or 7- channel stereo by pressing one of the sur- round mode buttons on the remote (2CH, PLC, PLM, 5CH, 7CH).
•To select any mode for 2-channel digital recordings. Press the SUR+ button on the remote, then use the +/– buttons to step through the optional modes until the desired mode is displayed.
•To select STEREO mode for 2-chan- nel digital recordings. Press the 2CH button on the front panel or remote.
•To select Dolby multichannel modes for 2-channel digital recordings. You can also step through the Dolby options (Pro Logic II, Pro Logic IIx, or 3-Stereo) by repeatedly pressing the DOLBY PLII/3ST button on the front panel. You can select Pro Logic or Pro Logic IIx Cinema or Mu- sic modes by pressing the PLC or PLM buttons on the remote.
To change the Cinema or Music option in Pro Logic II mode, press the SUR+ button the remote twice while in Pro Logic II or Pro Logic IIx modes. Then, press the +/– buttons to select the option.
English
•To select DTS Neo:6 mode for 2- channel digital recordings. You can also step through the DTS options (Neo:6 Cinema or Neo:6 Music) by repeatedly pressing the DTS Neo:6 button on the front panel.
To change the Cinema or Music option in Neo:6 mode, press the SUR+ button the remote twice while in Neo:6 mode. Then, press the +/– buttons to select the option.
•To select DSP multichannel modes for 2-channel digital recordings. You can also step through the DSP options (MUSIC 1-4, 5CH, 7CH) by repeatedly pressing the DSP button on the front panel. Directly select 5CH mode by pressing the 5CH button on the remote. Directly select 7CH mode by pressing the 7CH button on the remote.
Analog Stereo 
This type of recording includes any conven- tional stereo signal from the RSX-1056’s ana- log inputs, including analog audio from CD players, FM tuners, VCRs, tape decks, etc.
Analog stereo inputs require a choice about how the signal is routed through the RSX-1056. One option is the analog bypass mode. In this mode, the stereo signal is routed directly to the volume control and the outputs. It is pure 2-channel stereo, bypassing all of the digital circuitry. None of the bass management fea- tures, speaker level settings, contour settings, or delay settings are active. There is no sub- woofer output. A full-range signal is sent di- rectly to two speakers.
The other option converts the analog inputs to digital signals, passing them through the digital processors in the RSX-1056. This op- tion allows all of the features to be active in- cluding bass management settings, crossovers, subwoofer outputs, contour settings, etc. In this mode, you can select several surround modes including 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo, 7-CH Stereo modes. You can also use Dolby Pro Logic II or Pro Logic IIx surround, DTS Neo:6 surround, or one of the MUSIC 1-4 DSP modes.
