Rover 51, 61, 80 Refer to Engine Cranks Slowly section items, Problem, Transmission doesn’t drive

™

			Rover Mowers Ltd
			ABN 11 000 257 303
	POWERSTART OPTION
	Problem	Possible Causes	Corrective Action
ENGLISH	Engine cranks slowly	• Bad electrical connections	• Reconnect connections securely
			• Replace faulty electrical cables
		• Faulty/flat battery	• Replace/recharge the battery
	Engine won’t crank	•Refer to “Engine Cranks Slowly” section	• Refer to “Engine Cranks Slowly” section items
		items
		•Faulty key switch	• Replace the key switch
		•Faulty starter motor on the engine	• Have the engine serviced at an authorised service dealer
		• Operator presence control	• Activate operator presence control
			• Reconnect/replace disconnected/broken cable
			• Have the engine brake serviced by an authorised service agent

SELF PROPELLED OPTION

Problem

Transmission slips under load

Transmission doesn’t drive

Mower doesn’t free wheel easily when drive is in neutral

Possible Causes

•Drive cable damaged/disconnected/not adjusted correctly

•No adjustment left in the drive cable

•Drive clutches damaged or worn

•Slipping drive belt

•Refer to “Transmission Slips Under Load” section items

•Gearbox is damaged or seized

•Clutch Plate drive pin is broken

•Final drive sprocket roll pin is broken

•Broken/dislodged drive chain

•Broken/dislodged drive belt

•Engine drive pulley key broken

•Gear box pulley roll pin broken

•Pinion gears/pawls in the drive wheels broken/worn

•Rear wheels jammed with foreign material

•Pawls in the rear wheels are damaged or seized

•Bearings in wheels are seized.

Corrective Action

•Replace/reconnect/adjust drive cables

•Adjust drive clutches

•Replace drive cable

•Replace drive plates

•Readjust or replace the drive belts

•Replace worn drive pulley

•Replace broken belt tensioning spring

•Refer to “Transmission Slips Under Load” section items

•Replace gearbox

•Replace roll pin

•Replace roll pin

•Replace/refit drive chain

•Replace/refit drive belt

•Replace key in drive pulley

•Replace roll pin

•Replace broken/worn components

•Clean out and re-lubricate rear wheels

•Replace or re-lubricate the pawls

•Replace wheels bearings

13 Powered Walk Behind Mower - CE Part No. 04016218 Rev F © Copyright 10/2005