![](/images/new-backgrounds/1191685/19168539x1.webp)
3. Installation
3.1.2. Panel and DIN Rail Mounting
The RuggedBackbone™ RX1501 features optional mounting brackets for panel and DIN rail mounting. The optional brackets attach to both sides of the appliance at the rear of the chassis. For panel mounting, the mounting bracket provides four mounting holes. For DIN rail mounting, the DIN adaptor mounts to a standard 1" DIN rail and is secured with a lock screw on each adaptor.
To attach the mounting brackets, remove the black pan head Phillips screws from side of the appliance. Align the brackets with the threaded holes on the sides of the appliance. Secure the mounting bracket with the screws from the chassis. Torque all screws to 10
Figure 3.5. Installing Panel and DIN Rail Mounting Brackets
Figure 3.6. DIN Rail Mounting
RuggedCom® RuggedBackbone™ | 20 | RX1501 Installation Guide Rev 104 |