2. RuggedBackbone™ Modules
2.1. Front Panel
The RX1501 Front Panel is equipped with an RS232 serial console port for initial management functions, and a locally connected
Figure 2.2. Front View - RX1501
Other Front Panel features include:
•Utility USB port.
•Power module indicator LED.
•Line module indicator LEDs.
•Alarm Indicator LED, which indicates system alarm status.
•Lamp Test / Alarm Cutoff (LT/ACO) button.
•Removable 1GB Compact Flash (CF) card, which contains active and fallback installations of the ROX™ operating system, along with the configuration database and other system data.
•Chassis ground connection.
For more information on connecting to the ports on the front panel, see the following topics:
•Serial Console: Section 3.4, “Serial Console Port”
•Management Ethernet Interface: Section 3.7, “Copper Ethernet Ports”
•Critical Alarm (Failsafe) Relay Interface: Section 3.3, “Critical Alarm Wiring”
2.1.1.Module Status LEDs
The front panel module status LEDs provide the following information:
LED | Purpose | Description |
|
| I = Power supply is receiving input voltage. |
PM1 | Indicates power supply status. | O = Power supply is providing |
|
| output voltage to the RX1501. |
|
|
|
|
| Green = OK |
LM 1 through 6 | Indicates the line module status. | Orange = Warning alert |
|
| Red = Configuration error |
|
|
|
Table 2.1. Module Status LED Indications
RuggedCom® RuggedBackbone™ | 13 | RX1501 Installation Guide Rev 104 |
