Runco CR-26HD, CR-32HDi manual Timer OFF Button, Memory Preset Buttons

Controls and Functions

1.OFF / ON

Use these buttons to turn the Crystal Series LCD Display on or off.

2.Numeric Buttons

Use these buttons to enter TV channel numbers or menu pass codes. Use the 100 button to enter channel numbers above 99. Use the - button to enter DTV sub-channel numbers.

3.TIMER OFF Button

Press this button to set the sleep timer. Press it repeatedly to scroll through the available options (Off, 10, 30, 60, 120 or 180 minutes).

4.Source Selection Buttons:

INPUT 1

Press this button to switch to Input 1.

INPUT 2

Press this button to switch to Input 2.

INPUT 3

Press this button to switch to Input 3.

DVI

Press this button to switch to the Digital Video input.

RGB HD

Press this button to switch to the RGB HD input.

TV

Press this button to switch to the Antenna/DTV/CATV input.

Input 1 and Input 2 have both S-Video and composite video Note connectors. Input 3 has both component and composite video

connectors.

To specify which connection type you are using – or to switch from one to the other if equipment is connected to both – use the Input Selection menu under Setup (refer to Input Selection on page 37).

5.Memory Preset Buttons:

CUST

Press to recall settings for the current input from the “Custom” memory preset.

ISF NT (Night)

Press to recall settings for the current input from the “ISF Night” memory preset.

ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

Runco CR-26HD/CR-32HDi Owner’s Operating Manual 9