Runco CR-26HD, CR-32HDi manual

Operation

The Main Menu is the starting point for accessing all Crystal Series LCD Display functions.

(The ISF Calibration menu is not accessible until you enter a passcode.)

Main Menu

Runco CR-26HD

Source

Aspect Ratio

Picture Adjust

Audio

Channel

Timer

Setup

ISF Calibration

From the Main Menu, select Source to choose a video signal source.

The active source is indicated by a green square (■) to its left; in the example at right, TV is the active source.

Source

■TV Input1 Input2 Input3

DVI RGB

To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program material being viewed; refer to Table 4-1.

The currently-selected aspect ratio is indicated by a green square (■) to its right; in the example at left, Anamorphic is selected.

Note	The aspect ratio selection persists until you change it. (It is not
	saved independently for each input.)

Aspect Ratio

■Anamorphic Standard Letterbox VirtualWide

Runco CR-26HD/CR-32HDi Owner’s Operating Manual 27