Runco CR-40HD, CR-32HD manual Timer OFF

RS-232 Configurations

The following serial commands are meant to emulate buttons on the remote control. Each button has its own serial command, so effectively it is as if you were using the IR remote only you’ll be doing so via serial commands. Using these commands will provide active OSD responses just like the IR remote.

Each command begins with “[key” (quotations are not part of the command), followed by the four-digit number of the button. No carriage return is necessary. The response you receive from the unit if the command is valid will be a close bracket followed by the four-digit numeric code you sent. (Example: The ‘ON’ command is “[key0015”, the response will be “]0015”). All commands are in ASCII.

‘[‘	+	‘key’	+	‘000#’	Function
‘[‘	+	‘key’	+	0002	OFF
				0015	ON
‘[‘	+	‘key’	+	0004	Number 1
				0005	Number 2
				0006	Number 3
				0008	Number 4
				0009	Number 5
				0010	Number 6
				0012	Number 7
				0013	Number 8
				0014	Number 9
				0017	Number 0
				0035	Number 100
‘[‘	+	‘key’	+	0023	TIMER OFF
‘[‘	+	‘key’	+	0105	INPUT1
				0027	INPUT2
				0028	INPUT3
				0001	INPUT4
				0102	DVI
				0101	RGB HD
				0019	TV
‘[‘	+	‘key’	+	0003	CUSTOM
				0062	ISF NIGHT
				0031	ISF DAY
‘[‘	+	‘key’	+	0040	ANAMORPHIC
				0043	4X3
				0039	LETTERBOX
				0126	VIRTUALWIDE

‘[‘	+	‘key’	+	‘000#’	Function
‘[‘	+	‘key’	+	0007	RIGHT (Arrow Key)
				0016	DOWN (Arrow Key)
				0018	UP (Arrow Key)
				0011	LEFT (Arrow Key)
				0046	ENTER
‘[‘	+	‘key’	+	0026	MENU
‘[‘	+	‘key’	+	0100	EXIT
‘[‘	+	‘key’	+	0063	ASPECT RATIO
				0047	SIZE
				0034	POSITION
				0032	PIP
				0037	P.MODE
				0052	S.SWAP
				0033	SWAP
				0036	TV/AV
‘[‘	+	‘key’	+	0053	S.MODE
				0054	SURROUND
				0024	MTS/SAP
				0091	MUTE
‘[‘	+	‘key’	+	0057	FAVORITE
					CHANNEL 1
				0045	FAVORITE
					CHANNEL 2
				0044	FAVORITE
					CHANNEL 3
				0055	FAVORITE
					CHANNEL 4

34