Runco CR-40HD, CR-32HD manual RS-232 Configurations, RS-232C Configurations, Pin 1 Ground

RS-232 Configurations

	1 2 3 4
RS-232C Configurations		Pin 1: Ground

Pin 2: TxD

Pin 3: Ground

Pin 4: RxD

Note: • All commands are in ASCII format

•Default baud rate is 115200,8,N,1, but can be changed (see page 26)

•No carriage return is necessary

For an added convenience, an RJ-11 to DB9 (Male) adaptor is provided but is not required. If the adapter is used, use a null-modem cable.

The pin configuration on the adaptor is as follows:

No.	Pin Name	No.	Pin Name
1	No Connection	8	No connection
2	RXD (Receive data)	9	No Connection
3	TXD (Transmit data)
4	No connection		1	2	3	4	5
5	GND
			6	7	8		9
6	No connection
7	No connection

32