Runco CR-32HD, CR-40HD manual Connections, Connecting to the Video, Or INPUT2

Connections

To view television channels, a signal must be input from either an outdoor antenna or a cable television system.

1.Connect the antenna or input cable to the 75 Ω coaxial input on the rear of the display.

2.If you are using an indoor antenna, you may need to turn it when tuning your television until you receive a clear picture.

Rear of the TV

ANT

or

Cable Television

Network

Connecting an Antenna or Cable (Not applicable on the CR-40HD)

Rear of the display

INPUT1

Right side of the display

Input2

S-Video

R

Audio

L

Video

(A) For Video (RCA) Input	Connecting to the Video
	or S-Video Input (INPUT1
	or INPUT2)

(B) For S-Video Input

(A) For Video Input

1.Connect the RCA cable to the input jacks (video+ audio L/R of Input1 or Input2) on the display and output jacks on the external equipment such as a VCR, camcorder and some video game devices.

(B) For S-Video Input

1.Connect the S-Video/RCA (audio L/R of Input1 or Input2) cable to the input jacks on the display and output jacks on the external equipment such as a VCR, camcorder and some video game devices.

2.If the external equipment has mono audio output, connect it only to left jack of the Audio Input/Output.

13