Troubleshooting
For Monitor | “No signal” message |
| “Out of range” |
| message |
| Picture rolls down |
| vertically. |
| A shadowed area |
| appears on the |
| screen. |
| The image is too |
| large or too small. |
| Horizontal or vertical |
| bars appear on the |
| screen. |
| The power indicator |
| light blinks green. |
•Check if the signal cable (DVI Cable) is properly connected to the computer. (See page 15)
•This message may appear when the resolution and frequency of the video card in the computer are out the range of the display. Select the proper resolution and frequency for the display. (See page 35)
•Check if the signal cable (DVI Cable) is properly connected to the computer. (See page 15)
•Make sure the resolution and frequency of the computer video card are set properly to the range of the display. Set the picture again referring to the standard display mode and current mode. (See page 35)
•Adjust the size/position of the image. (See page 22 or 24)
•Adjust the frequency and fine tuning.
•Adjust the resolution and frequency to the recommended specifications. (See page 35)
(1024 x 768 @ 60Hz)
•The display is in power saving mode, as it is not receiving a signal from the computer. The picture will return to normal status when you press any key on the keyboard or move the mouse.
38
