Runco Q-750I Q-750iRear Panel, Front Ir Sensor, Exhaust Vent, Status Led, Off = Normal operation

Controls and Functions

•FRONT IR SENSOR

Receives infrared signals from the remote control unit.

•EXHAUST VENT

Warm air exits the projector through this vent. Ensure that it is not blocked.

•STATUS LED

Indicates projector status as follows:

•Solid green = AC power present, ready to turn on.

•Flashing green = Projector is initializing; keypad functions not allowed.

•Off = Normal operation.

•Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix problem

•Solid red = Error that requires servicing (fan failure, Power-on Self-Test (POST) failure).

2.2	Figure 2-2shows the Q-750i rear panel.
Q-750i Rear Panel
	11	10	9	8	7	6	5

1

2

Figure 2-2. Q-750i Rear Panel

AC	3	4
AC

1.HDMI 1 (Digital) HDMI 2 (Digital)

HDCP-compliant digital video inputs for connecting an HDMI or DVI source.

2.POWER INPUT (100 to 240 VAC) Connect the Q-750i to power here.

3.RGB

Provides a standard, 15-pin VGA-style connection to either an RGB or component high-definition source, or to a personal computer. The Q-750i automatically detects the input signal resolution.

4.COMPONENT 2

Three BNCs for connecting component (YPbPr) video sources.

6 Q-750i Series Installation/Operation Manual