Runco Q-750I operation manual 1. Q-750iSpecifications

7. Specifications

Table 7-1lists the Q-750i specifications.		7.1
Table 7-1. Q-750i Specifications		Q-750i Specifications
Projector Type:	Digital Light Processing™ (DLP™),Single-Chip, 16:9
	SuperOnyx™ DMD™ with InfiniLightTM Illumination
Illumination:	RGB InfiniLightTM LEDs for 135% NTSC color gamut with
	Runco Smart ColorTM and Personal Color EqualizerTM
Native Resolution:	Full HD, 1920 x 1080 (16:9)
Aspect Ratios:	4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema
Video Standards:	HDMI and DVI with HDCP for digital video, Component and
	RGB HDTV (1080p, 1080i, 720p), Component and RGB EDTV
	(576p, 480p), Component, Composite and S-Video SDTV
	(576i, 480i), RGB SCART with adapter, NTSC (M,4.43), PAL
	(B,G,H,I,N,M), SECAM (M)
Video Compatibility:	480i, 480p, 576i, 576p, 720p, 1080i 50/60, 1080p 24/50/60
Picture Size (16:9 Screen):	Recommended Width: 72 in. (1.83 m) to 92 in. (2.34 m)
	Maximum Width: 108 in. (2.74 m)
Throw Distance	Refer to Table 3-3
(Factor x Screen Width):
Vertical Offset:	Standard Q-750i - 60% of screen height above or below lens
	center (120% of one half of the screen height)
	Q-750i/CineWide or Q-750i/CineWide with AutoScope -
	25% of screen height (50% of one half of the screen height)
	above or 60% of screen height (120% of one half of the screen
	height) below lens center, when projector is inverted
Horizontal Offset:	12.5% of screen width left or right of lens center (25% of one
	half of the screen width)
Video Inputs:	(2) HDMI; (2) Component (RCA, BNC); (1) RGB (HD15); (1)
	S-video; (1) Composite; (1) RS-232; (1) IR Repeater
Control Options:	- Discrete IR remote
	- Serial commands via RS-232
RS-232 Communication	38400 bps, no parity, 8 data bits, 1 stop bit, no flow control
Parameters:
+12V Outputs:	Max. 0.25 Amps, programmable; Tip = +12V; Sleeve =
	Ground

Q-750i Series Installation/Operation Manual 85