APC iSCSI SATA II installation and configuration manual Technical Specifications

1.2 Technical Specifications

Form Factor：
1U 19-inch rackmount chassis
RAID processor：				Instant RAID volume availability and
Intel XScale IOP331				background initialization support
RAID Level：				Supports over 2TB per volume
0, 1, 0+1, 3, 5, 6, 10 and JBOD
Cache memory：				Online consistency check
512MB ~ 1GB DDR333 DIMM supported
No. of channels (host and drives)：				Bad block auto-remapping
2 and 4
Host	bus	interface ： 1Gb/s	Ethernet	S.M.A.R.T. support
Drive	bus	interface ： 3Gb/s	SATA II	New disk insertion / removal detection
Hot-swap drive trays：				Auto volume rebuild
Four (4) 1-inch trays
Host access control：				Array roaming
Read-Write & Read-Only
Supports CHAP authentication				Audible alarm
Jumbo frame support				Password protection
Global hot spare disks				UPS connection
Maximum logical volume: up to 255				Power supplies: 220W power supply
				w/PFC
Maximum host connection：up to 32				Cooling fans：1
Maximum host clustering：				Power requirements：
				AC 90V ~ 264V full range
up to 8 for one logical volume
				6A ~ 3A, 50Hz ~ 60Hz
				Environmental
Online Volume migration				Relative Humidity：
				10% ~ 85% Non-condensing
Online Volume expansion				Operating Temp：
				10oC ~ 40oC (50oF ~ 104oF)
Configurable stripe size				Physical Dimensions：
				44(H) x 446.4(W) x 506(D)mm

[6]