APC iSCSI SATA II installation and configuration manual Rear View

2.3.2 Rear View

1. Uninterruptible Power Supply (UPS) Port (APC Smart UPS only)

The subsystem may come with an optional UPS port allowing you to connect a APC Smart UPS device. Connect the cable from the UPS device to the UPS port located at the rear of the subsystem. This will automatically allow the subsystem to use the functions and features of the UPS.

2. RS232 Port

The subsystem is equipped with an RS232 serial port allowing you to connect a PC or terminal. Use the null modem cable to

3. R-Link Port: Remote Link through RJ-45 Ethernet for remote management

The subsystem is equipped with one 10/100 Ethernet RJ45 LAN port. Use web browser to manage the RAID subsystem through Ethernet for remote configuration and monitoring.

4. LAN1 / LAN2 Gigabit Ports

The subsystem is equipped with two Gigabit data ports for connecting to the network.

5. Cooling Fan

One blower fan is located at the rear of the subsystem. It provides sufficient airflow

and heat dispersion inside the chassis. In case a fan fails to function, the “ ” Fan fail LED will turn red and an alarm will sound.

6. Power Switch

Use this to power on the system.

[18]