APC iSCSI SATA II Event Notifications, PD events Level Type Description

B.	Event Notifications
š		PD events
		Level	Type	Description
		INFO	Disk inserted	Disk <slot> is inserted into system.
		WARNING	Disk removed	Disk <slot> is removed from system.
		ERROR	HDD failure	Disk <slot> is disabled.
š		HW events
		Level	Type	Description
		WARNING	ECC error	Single-bit ECC error is detected.
		ERROR	ECC error	Multi-bit ECC error is detected.
		INFO	ECC info	ECC memory is installed.
		INFO	ECC info	Non-ECC memory is installed.
		INFO	SCSI info	Received SCSI Bus Reset event at the
				SCSI Bus <number>.

šEMS events

Level	Type	Description
INFO	Power installed	Power <number> is installed.
ERROR	Power absent	Power <number> is absent.
INFO	Power work	Power <number> is restored to work.
ERROR	Power warning	Power <number> is out of work.
WARNING	Power detect	PSU signal detection <number>.
INFO	Fan work	Fan <number> is restored to work.
ERROR	Fan warning	Fan <number> is out of work.
INFO	Fan installed	Fan <number> is installed.
ERROR	Fan not	Fan <number> is not present.
	present
WARNING	Thermal	System temperature <location> is a little
	warning	bit higher.
ERROR	Thermal critical	System Overheated <location>!!!
ERROR	Thermal critical	System Overheated <location>!!! The
	shutdown	system will do the auto shutdown
		immediately.
WARNING	Thermal ignore	Unable to update thermal value on
	value	<location>.
WARNING	Voltage	System voltage <location> is a little bit
	warning	higher/lower.
ERROR	Voltage critical	System voltages <location> failed!!!
ERROR	Voltage critical	System voltages <location> failed!!! The
	shutdown	system will do the auto shutdown
		immediately.
INFO	UPS info	UPS detection succeeded.
WARNING	UPS error	UPS detection failed.
ERROR	UPS error	AC loss for the system is detected.
ERROR	UPS error	UPS Power Low!!! The system will do the

[80]