Runco Q-750I operation manual Using the On-Screen Menus

Operation

1.Press the MENU button on the remote control to display the Main Menu.

2.There are six menus. Press or to select a sub-menu.

3.Press or to select a sub-menu item.

4.For each sub-menu item, the currently-selected value appears in white text or is otherwise highlighted. Press or to choose a setting for that item, or press ENTER to go to another sub-menu.

5.Press MENU to return to the previous menu.

6.From the Main Menu, press MENU to turn off the OSD menu.

The Q-750i OSD menus are arranged hierarchically, as shown in Figure 4-1.Depending on the selected input source and signal characteristics, some menu options may not be available.

4.3

Using the On-Screen Menus

		16:9, Letterbox, 4:3,
	Aspect Ratio	VirtualWide, Cinema or
		V-Cinema
		Recall Memory
	Memory
		Save Settings
		Save ISF
	Brightness
	Contrast
	Color	0 ... 50* ... 100
Main
	Tint
	Sharpness
	Noise Reduction
	Overscan	Off, Crop or Zoom
		HDMI 1, HDMI 2, RGB,
	Input Select	Comp. 1, Comp. 2, Video,
		S-Video or SCART
		Off, HDMI 1, HDMI 2, RGB,
	PIP Select	Comp. 1, Comp. 2, Video,
		S-Video or SCART
	Resync	(press ENTER to execute)
	Color Space	Auto, REC709, REC601,
		RGB-PC or RGB-Video
	Video Standard	Auto, NTSC, PAL or SECAM
	Gamma	1.8, 2.0, 2.2, 2.35 or 2.5
	Color Temperature	5500K, 6500K, 7500K or
		9300K
	DLP Frame Rate	Auto, 48 Hz, 50 Hz or 60 Hz
	Color Gamut	Auto, REC709, SMPTE-C,
		EBU, Native, DCI or PCE
	SatCo	On or Off
	ConstantContrast	Low, Medium, High or Off
	Adaptive Contrast	On or Off
	RGB Adjust	Red / Green / Blue Offset
Advanced		Red / Green / Blue Gain
		V. Position
		H. Position
	Fine Sync
		Phase
		Tracking
		Sync Level
		Hue (Red / Yellow / Green /
		Cyan / Blue / Magenta)
		Saturation (Red / Yellow /
		Green / Cyan / Blue / Magenta)
	PCE	Level (Red / Yellow / Green /
		Cyan / Blue / Magenta)
		Runco Smart Color (RSC) (On
		or Off)
		White Balance (Red / Green /
		Blue Gain)

Figure 4-1. Q-750i OSD Menu Structure

	Input Enable	On or Off for each source
		Top Left, Top Right, Bottom
	PIP Position	Left, Bottom Right,
		Picture-by-Picture or
		Split Screen
	Menu Position	Top Left, Top Right, Bottom
		Left, Bottom Right or Center
System	Translucent Menu	0% (opaque), 25%, 50% or
		75%
	Blank Screen	Logo, Black, Blue or White
	Auto Power Off
		On or Off
	Auto Power On
	Rear Projection
	Ceiling Mode	Auto, On or Off
	Logo Display	On or Off
	Power On Chime
	HD 1 Key	HDMI 1, HDMI 2, RGB,
	HD 2 Key	Comp. 1, Comp. 2, Video,
		S-Video or SCART
Control	HD 3 Key
	CineWide	Off, CineWide or AutoScope
	Trigger 1	AutoScope, Lamp, 4:3 or
		RS-232
	Trigger 2
Language	English, French, German,	Italian, Spanish, Swedish,
	Portuguese or Russian
	Model Name
	Unit Serial Number
	Software Version
	LED Driver Version	(read-only)
	Active/PIP Source
Service	Pixel Clock
	Signal Format
	H/V Refresh Rate
	Factory Reset	Reset Everything?
		(Yes or No)
	Blue Only	On or Off
	Test Patterns	On or Off
	Altitude	Auto or High

Q-750i Series Installation/Operation Manual 45