Runco Q-750I operation manual 2.Aspect Ratio Settings continued, Operation

Operation

Table 4-2. Aspect Ratio Settings (continued)

Aspect		Aspect		Geometry of Projected Image
		Ratio of
Ratio	Description		With Standard Lens
		Source			With Anamorphic Lens (2.35:1 Screen)
Setting
		Signal	(1.78:1 Screen)
	Select Cinema to view
	2.35 source material in its
	native aspect ratio.
	With a 16:9 screen and a
	non-CineWide projector
	(no anamorphic lens), the
	upper and lower portions
	of the screen are
	masked, but the
	geometry of the active
	image area is
	unchanged.
Cinema	With a 2.35:1 screen and	2.35:1
	a CineWide-equipped
	projector, the video
	processor scales the
	2.35:1 image so that the
	active image area fills the
	16:9 chip surface,
	eliminating the black
	bars. The secondary,
	anamorphic lens then
	restores the proper
	geometry to the 2.35:1
	image.
	A 16:9 image is scaled
	NON-linearly (more on
	the sides than in the
V-	center) to fit a 2.35:1
Cinema	screen.	16:9
(Virtual
	Virtual Cinema is
Cinema)
	available only on
	CineWide-equipped
	projectors.

Q-750i Series Installation/Operation Manual 49