Runco Q-750I operation manual Operation, Selecting An Input, Source, Using Picture-In-PicturePIP

4. Operation

When you turn on the Q-750i, it switches to the last selected input and looks for a valid signal.

4.1

Selecting An Input

Use these buttons on the remote control to select an input source directly.

You can assign the HD 1, HD 2 and HD 3 buttons to any input. The default assignments are:

HD 1 = Component 1, HD 2 = Component 2, HD 3 = RGB.

SOURCE

VID S-VID HDMI1 HDMI2

HD1 HD2 HD3

Source

For more information, refer to HD 1 Key / HD 2 Key / HD 3 Key on page 66.

For PIP purposes, there are three groups of inputs separated by their display modes:

•Video (SD) group: Video, S-Video and SCART inputs.

•Graphic (HD) group: Component 1, Component 2 and RGB inputs.

•Digital Video group: HDMI 1 and HDMI 2 inputs.

PIP shows one input from any of these groups within or beside one input from either of the other two groups.

For more information, refer to PIP Position on page 63.

4.2 Using

Picture-In-Picture (PIP)

Q-750i Series Installation/Operation Manual 43