Manuals / Runco / Computer Equipment / Projector

Runco SC-1 manual Ballast Control Connector 9-pin, D-sub male

Models: SC-1

1 122
Download 122 pages 3.04 Kb
Page 18
Image 18

Controls and Functions

1.DOOR RELEASE

To access SC-1 internal components, press this button to release the hinged door on the top of the projector. After closing the door, press the button again to latch it.

2.STATUS / CONTROL PANEL

For a detailed description, refer to SC-1 Control Panel on page 9.

3.EXHAUST DUCT

Connect the projector’s 8” top exhaust hole to a rigid duct. Add a 50/60-Hz heat extractor at the opposite end of the duct so that adequate airflow (at least 600 cubic feet per minute) is maintained near the top of the projector. The vane switch in this vent will prevent start-up and/or trigger a shutdown if airflow is inadequate.

4.HORIZONTAL OFFSET KNOB ACCESS

This opening provides access to the horizontal offset knob, for adjusting the projected image position left or right relative to the lens center. (Use a 4.0-mm hex wrench.)

5.INPUT PANEL

Connect the DHD Controller to the projector here; refer to Connecting the DHD Controller to the SC-1on page 32.

6.AC INPUT

Connects the projection head to the main power supply/lamp ballast.

7.BALLAST CONTROL CONNECTOR (9-pin, D-sub male)

Connects the RS-232 control signals between the ballast and the projection head, enabling the projection head to dictate the amount of current (or power) to be supplied from the ballast to the projection head.

8.BALLAST SAFETY INTERLOCK CONNECTOR (9-pin, D-sub female) Connects the RS-232 safety interlock signals and the Lamp Enable signal between the ballast and the projection head.

9.POWER SUPPLY/LAMP BALLAST

Provides power to the projector lamp and other projector components. Normally mounted at the rear of the projection head, but can also be detached.

10.220-VAC LINE CORD

Use this to connect the SC-1 to your AC power source.

The SC-1 requires a dedicated, 220-VAC/30A circuit. Connect

Caution only the SC-1 to this circuit.

11.LAMP/AIR FILTER COVER

Remove this cover to access the lamp compartment and air filter.

12.AIR FILTER

Intake air flows through the filter before circulating in the front compartment to cool the main electronics. Replace the air filter whenever the lamp is replaced – or more often in dusty or dirty environments. Check condition monthly. Refer to Filter Replacement on page 91 for detailed instructions.

13.FRONT IR SENSOR

Receives IR commands from the TheaterMaster remote control.

14.FOCUS KNOB

Located directly under the primary lens. Use this to focus projected image.

15.VERTICAL OFFSET KNOB ACCESS

Remove this plastic cover to access the vertical offset knob, for adjusting the projected image position up or down, relative to the lens center.

6

Runco SC-1 Owner’s Operating Manual

Page 17 Page 19
Page 18
Image 18
Runco manual Ballast Control Connector 9-pin, D-sub male, SC-1 requires a dedicated, 220-VAC/30A circuit. Connect
Page 17 Page 19

SC-1 specifications

The Runco SC-1 is a premier solution in the realm of home theater projection systems, designed for those who appreciate cinema-quality visuals in the comfort of their own homes. Known for its advanced technologies and robust features, the SC-1 sets a high standard within the industry.

One of the standout characteristics of the Runco SC-1 is its use of DLP (Digital Light Processing) technology, which is reputed for delivering stunning contrast and vibrant colors. This technology allows the projector to achieve remarkable image clarity, making it suitable for various viewing environments. The SC-1 boasts a native resolution of 1080p, providing crisp details that enhance the viewing experience, whether one is watching a blockbuster movie or streaming the latest series.

Another noteworthy feature of the Runco SC-1 is its proprietary processing technology, which optimizes video performance. With advanced deinterlacing and noise reduction capabilities, the SC-1 transforms standard content into high-definition clarity, ensuring that images remain sharp and lifelike. Additionally, the projector incorporates Runco's renowned Color Palette technology, which enables precise calibration of color parameters, allowing users to achieve the most accurate and vivid colors possible.

The SC-1 also supports a high dynamic range (HDR), enabling a broader spectrum of colors and improved contrast between the brightest and darkest parts of the image. This enhancement makes it a compelling choice for those who seek a more immersive viewing experience.

Connectivity is another strong suit of the Runco SC-1. The projector is equipped with multiple HDMI ports, allowing users to connect various devices, such as Blu-ray players, gaming consoles, and streaming devices. The ability to access 3D content adds an extra layer of entertainment, inviting users to step into a world of depth and realism.

Moreover, the Runco SC-1 is designed with versatility in mind. It offers a wide range of lens options to cater to different room sizes and projection distances. This adaptability ensures that the projector can fit seamlessly into existing home theater setups.

In summary, the Runco SC-1 is a state-of-the-art projector that excels in delivering exceptional image quality, advanced processing technologies, and versatile connectivity options. Its commitment to superior performance makes it a distinguished choice for home theater enthusiasts seeking an unparalleled cinematic experience.