Appendix C - Cable
SAGEM F@st™ 1500 Reference Manual - 288053220-03
Reproduction and communication prohibited without the written permission of E
E E
E Page C-5
C.2.2 Wiring Conventions
For ADSL connections, a cable requires one pair of wir es. Each wire is identified by different
colors. For example, one wire might be red and the other, red wit h white stripes. Also, an RJ-11
connector must be attached to both ends of the cable.
Each wire pair must be attached to the RJ-11 connectors in a specific orie ntation. The following
figure illustrates how the pins on the RJ-11 connector are num bered. Be sure to hold the
connectors in the same orientation when attaching the wires to the pins.
Figure C.2 - RJ-11 Connector Pin Numbers
Figure C.3 - RJ-11 Pinouts
Pin Signal Name Wire Color
1Not used _
2Line 2 Tip Black or White/Orange
3Line 1 Ring Red or Blue/W hite
4Line 1Tip Green or White/Blue
5Line 2 Ring Yellow or Oran ge/White
6Not used _