Sagem 1500, 1500WG 4.5 LAN

4 - Configuring the SAGEM F@st™ 1500 ADSL router

SAGEM F@st™ 1500 Reference Manual - 288053220-03

Page 4-18 Reproduction and communication prohibited without the written permission of E

E E

E

4.5 LAN

Use the LAN menu to configure the LAN IP address and to enable the DHCP s erver for

dynamic client address allocation.

Parameter Description

LAN IP

IP Address The IP address of the SAGEM F@st™ 1500 ADSL Router.

IP Subnet Mask The subnet mask of the network.

DHCP Server The SAGEM F@st™ 1500 ADSL Router comes with the DHCP function. To

dynamically assign an IP address to client PCs, enable this function.

Lease Time Set the IP lease time. For home networks this may be set to Forever, which means

there is no time limit on the IP address lease.

IP Address Pool

Start IP Specify the start IP address of the DHCP pool. Do not include the gateway

address of the SAGEM F@st™ 1500 ADSL Router in the client address pool. If

you change the pool range, make sure the first three octets match the gateway’s

IP address, i.e., 192.168.2.xxx

End IP Specify the end IP address of the DHCP pool.

Domain Name If your network uses a domain name, enter it here. Otherwise, leave this field

blank.

Remember to configure your client PCs for dynamic addres s allocation

(See section 3.1 for details).

In this menu is included the following sub-menu:

¾ DNS (see section 4.5.1).

Contents

Main Warning ! Contents 1. Introduction 1-1 2. Description and Physical installation 2-1 3. Configuring Client Computer 3-1 4. Configuring the SAGEM F@st 1500 ADSL router 4-1 A. Appendix A - Troubleshooting A-1 B. Appendix B - Safety warnings B-1 C. Appendix C - CABLES C-1 D. Appendix D - Technical specifications D-1 E. Appendix E - Default configuration E-1 List of figures 1. Introduction 1.1 About the SAGEM F@stTM 1500WG ADSL Router 1.2 Features and Benefits 1.3 Applications Wireless and Wired LAN Internet Access Shared IP Address Virtual Server DMZ Host Support Security Virtual Private Network (VPN) 1.4 Composition of the supply 1.5 Prerequisites Page 2. Description and Physical installation 2.1 Hardware Description 2.1.1 Front panel 2.1.2 Rear panel 2.2 Physical Installation 2.2.1 Installation instructions Environment Power supply source Maintenance Page 2.3 Settings and Connecting 2.3.1 ISP settings 2.3.2 Install the SAGEM F@stTM 1500 ADSL Router 2.3.3 Connect the ADSL Line 2.3.4 Phone Line Configuration Page 2.3.5 Attach to Your Network Using Ethernet Cabling 2.3.6 Connect the Power Adapter 2.4 Powering up the SAGEM F@st 1500 ADSL router Page Page PC Mac 3.1 TCP/IP Configuration 3.2 Configuring your Windows computer 3.2.1 On Windows 98 / Me Page Page Page Page Page Page TCP/IP Configuration Setting Page 3.2.3 On Windows 2000 Page Page Page 3.2.4 On Windows XP Page Obtain IP Settings from Sagem F@st1500 ADSL Router Page 3.3 Configuring your Mac computer Page Page Page Navigating the Management Interface Setup Wizard: Advanced Setup: Making Configuration Changes Page 4 - Configuring the SAGEM F@st 1500 ADSL router 4.1 STATUS Page 4.2 "SETUP WIZARD" menu 4.2.1 PPP Setting 4.2.2 Channel and SSID 4.2.3 WEP 4.2.4 Access Control 4.3 SYSTEM 4.3.1 Time Settings 4.3.2 Password Settings 4.3.3 Configuration tools 4.3.4 Firmware Upgrade 4.3.5 Reset 4.4 "WAN" menu E Page 4-15 4.4.1 ATM PVC Enter ATM (Asynchronous Transf er Mode) function parameters here. E The following parameters only appear in "Routed" mode that you can select in the "Protocol" field: Page 4.5 LAN 4.5.1 DNS 4.6 Wireless 4.6.1 Channel and SSID 4.6.2 Access Control Page 4.6.4 WEP 4.6.5 WPA Page Page 4.7 NAT 4.7.1 Address Mapping 4.7.2 Virtual Server 4.7.3 Special Application Page 4.8 Firewall 4.8.1 Access Control Page 4.8.2 MAC Filter 4.8.3 URL Blocking 4.8.4 Schedule Rule 4.8.5 Intrusion Detection 1) Intrusion Detection Feature 2) Stateful Packet Inspection Page 3) When hackers attempt to enter your network, we can alert you by e-mail 4) Connection Policy 5) DoS Criteria and Port Scan Criteria 4.8.6 DMZ 4.9 Route 4.9.1 Static Route Page Page 4.9.3 Routing Table 4.10 QoS Page 4.10.1 Traffic Mapping Page 4.10.2 Traffic statistics 4.11 Advanced 4.11.1 ADSL ADSL Status Information Page The following items are included on this inform ation page: 4.11.2 Remote Management 4.11.3 SNMP SNMP Setting SNMP Trap 4.11.4 UPnP 4.12 Finding the MAC address of a Network Card Page Page Appendix A - Troubleshooting Page Page Page Appendix B - Safety warnings B.1 Safety warnings B.1.1 Safety levels on the mains adapter unit B.1.2 Safety levels on the SAGEM F@st 1500 unit Appendix B - Safety warnings B.2 CE declaration of conformity Safety EMC Radio (specific to SAGEM F@st 1500WG) Page Page C.1 Ethernet cable C.1.1 Specifications C.1.2 Wiring Conventions C.1.3 RJ-45 Port Connection C.1.4 Pin Assignments General Straight-Through Wiring Crossover Wiring Page C.2.2 Wiring Conventions Page D. Appendix D - Technical specifications D.1 Mechanical Characteristics - Displays D.2 Electrical Characteristics ADSL Features Input Power D.3 Soft Component Features ATM Features Management Features Security Features LAN Features D.4 Radio Features RF Output Power Modulation Rate-Output Power (dBm) Modulation Rate-Output Power (dBm) Sensitivity Modulation Rate-Receiver 2.412 ~ 2.484 HGz Sensitivity (dBm) Modulation Rate-Receiver Sensitivity Typical (dBm) D.5 Environmental characteristics Internet Standards Page Page Appendix E - Default configuration E.1 Default user name and password Password Empty E.2 Default configuration on the local area network side E.3 Default configuration on the wide area network side Appendix E - Default configuration