Manuals / Brands / Computer Equipment / Network Router / Sagem / Computer Equipment / Network Router

Sagem 1500, 1500WG The following items are included on this inform ation page:

1 134

Download 134 pages, 3.03 Mb

4 - Configuring the SAGEM F@st™ 1500 ADSL router

SAGEM F@st™ 1500 Reference Manual - 288053220-03

Reproduction and communication prohibited without the written permission of E

E E

E Page 4-55

The following items are included on this inform ation page:

Parameter Description

Status

Line Status Shows the current status of the ADSL line connection.

Data Rate

Upstream Maximum upstream data rate.

Downstream Maximum downstream data rate.

Operation Data/Defect Indication

Noise Margin Maximum upstream and downstream noise margin.

Output Power Maximum fluctuation in the output power.

Attenuation Maximum reduction in the strength of the upstream and downstream signal.

Fast Path FEC Correction

There are two latency paths that may be used: fast and interleaved. For either path, a

forward error correction (FEC) scheme is employed to ensure higher data integrity.

For maximum noise immunity, an interleaver may be used to supplement FEC

Interleaved Path FEC Correction

An interleaver is basically a buffer used to introduce a delay, allowing for additional

error correction techniques to handle noise. Interleaving slows the data flow and may

not be optimal for real-time signals such as video transmission.

Fast Path CRC Error

The number of Fast Path Cyclic Redundancy Check errors.

Interleaved Path CRC Error

The number of Interleaved Path Cyclic Redundancy Check errors.

Loss of Signal Defect

Momentary signal discontinuities.

Loss of Frame Defect

Failures due to loss of frames.

Loss of Power Defect

Failures due to loss of power.

Fast Path HEC Error

Fast Path Header Error Concealment errors.

Interleaved Path HEC Error

Interleaved Path Header Error Concealment errors.

Statistics

Superframes represent the highest level of data presentation.

Each superframe contains regular ADSL frames, one of which is used to provide

superframe synchronization, identifying the start of a superframe. Some of the

remaining frames are also used for special functions.rs.

Received Superframes Interleaved

Number of interleaved superframes received.

Transmitted Superframes Interleaved

Number of interleaved superframes transmitted.

Received Superframes Fast

Number of fast superframes received

Transmitted Superframes Fast

Number of fast superframes transmitted.

Contents

Main Warning ! Contents 1. Introduction 1-1 2. Description and Physical installation 2-1 3. Configuring Client Computer 3-1 4. Configuring the SAGEM F@st 1500 ADSL router 4-1 A. Appendix A - Troubleshooting A-1 B. Appendix B - Safety warnings B-1 C. Appendix C - CABLES C-1 D. Appendix D - Technical specifications D-1 E. Appendix E - Default configuration E-1 List of figures 1. Introduction 1.1 About the SAGEM F@stTM 1500WG ADSL Router 1.2 Features and Benefits 1.3 Applications Wireless and Wired LAN Internet Access Shared IP Address Virtual Server DMZ Host Support Security Virtual Private Network (VPN) 1.4 Composition of the supply 1.5 Prerequisites Page 2. Description and Physical installation 2.1 Hardware Description 2.1.1 Front panel 2.1.2 Rear panel 2.2 Physical Installation 2.2.1 Installation instructions Environment Power supply source Maintenance Page 2.3 Settings and Connecting 2.3.1 ISP settings 2.3.2 Install the SAGEM F@stTM 1500 ADSL Router 2.3.3 Connect the ADSL Line 2.3.4 Phone Line Configuration Page 2.3.5 Attach to Your Network Using Ethernet Cabling 2.3.6 Connect the Power Adapter 2.4 Powering up the SAGEM F@st 1500 ADSL router Page Page PC Mac 3.1 TCP/IP Configuration 3.2 Configuring your Windows computer 3.2.1 On Windows 98 / Me Page Page Page Page Page Page TCP/IP Configuration Setting Page 3.2.3 On Windows 2000 Page Page Page 3.2.4 On Windows XP Page Obtain IP Settings from Sagem F@st1500 ADSL Router Page 3.3 Configuring your Mac computer Page Page Page Navigating the Management Interface Setup Wizard: Advanced Setup: Making Configuration Changes Page 4 - Configuring the SAGEM F@st 1500 ADSL router 4.1 STATUS Page 4.2 "SETUP WIZARD" menu 4.2.1 PPP Setting 4.2.2 Channel and SSID 4.2.3 WEP 4.2.4 Access Control 4.3 SYSTEM 4.3.1 Time Settings 4.3.2 Password Settings 4.3.3 Configuration tools 4.3.4 Firmware Upgrade 4.3.5 Reset 4.4 "WAN" menu E Page 4-15 4.4.1 ATM PVC Enter ATM (Asynchronous Transf er Mode) function parameters here. E The following parameters only appear in "Routed" mode that you can select in the "Protocol" field: Page 4.5 LAN 4.5.1 DNS 4.6 Wireless 4.6.1 Channel and SSID 4.6.2 Access Control Page 4.6.4 WEP 4.6.5 WPA Page Page 4.7 NAT 4.7.1 Address Mapping 4.7.2 Virtual Server 4.7.3 Special Application Page 4.8 Firewall 4.8.1 Access Control Page 4.8.2 MAC Filter 4.8.3 URL Blocking 4.8.4 Schedule Rule 4.8.5 Intrusion Detection 1) Intrusion Detection Feature 2) Stateful Packet Inspection Page 3) When hackers attempt to enter your network, we can alert you by e-mail 4) Connection Policy 5) DoS Criteria and Port Scan Criteria 4.8.6 DMZ 4.9 Route 4.9.1 Static Route Page Page 4.9.3 Routing Table 4.10 QoS Page 4.10.1 Traffic Mapping Page 4.10.2 Traffic statistics 4.11 Advanced 4.11.1 ADSL ADSL Status Information Page The following items are included on this inform ation page: 4.11.2 Remote Management 4.11.3 SNMP SNMP Setting SNMP Trap 4.11.4 UPnP 4.12 Finding the MAC address of a Network Card Page Page Appendix A - Troubleshooting Page Page Page Appendix B - Safety warnings B.1 Safety warnings B.1.1 Safety levels on the mains adapter unit B.1.2 Safety levels on the SAGEM F@st 1500 unit Appendix B - Safety warnings B.2 CE declaration of conformity Safety EMC Radio (specific to SAGEM F@st 1500WG) Page Page C.1 Ethernet cable C.1.1 Specifications C.1.2 Wiring Conventions C.1.3 RJ-45 Port Connection C.1.4 Pin Assignments General Straight-Through Wiring Crossover Wiring Page C.2.2 Wiring Conventions Page D. Appendix D - Technical specifications D.1 Mechanical Characteristics - Displays D.2 Electrical Characteristics ADSL Features Input Power D.3 Soft Component Features ATM Features Management Features Security Features LAN Features D.4 Radio Features RF Output Power Modulation Rate-Output Power (dBm) Modulation Rate-Output Power (dBm) Sensitivity Modulation Rate-Receiver 2.412 ~ 2.484 HGz Sensitivity (dBm) Modulation Rate-Receiver Sensitivity Typical (dBm) D.5 Environmental characteristics Internet Standards Page Page Appendix E - Default configuration E.1 Default user name and password Password Empty E.2 Default configuration on the local area network side E.3 Default configuration on the wide area network side Appendix E - Default configuration