INSERTING BEATERS,HOOKS,WHISK (Continued)

3.Insert Beater or Cookie Dough Hook, one at a time, into holes on underside of Motor Housing. See Figure 2. Insert Beater or Cookie Dough Hook with round stem disk into round hole; hexagonal stem disk into hexagonal hole. See Figure 2A. Push in firmly and twist slightly to lock each Beater or Cookie Dough Hook into place.

4.Insert Whisk Stem (round stem disk) into round hole. Push in firmly and twist slightly to lock Whisk into place.

Figure 2A

Figure 2

MIXING

1. Place desired ingredients into large or small Mixing Bowl.

NOTE: Maximum capacity of the large Mixing Bowl is 4 quarts; the small Mixing Bowl is 1-1/2 quarts. Do not fill Mixing Bowl more than half full with ingredients.

2.Lift Turntable up and off of the Base. Note Small and Large Mixing Bowl placement as marked on the Base. Replace Turntable at desired location.

3.Place filled Mixing Bowl (large or small) onto Turntable. See Figure 3. Be sure to align

rim on underside of Mixing Bowl with corresponding rim on Turntable. When Bowl is placed properly, it will spin freely on Turntable.

Release

16 SPEED MIXER

Start

Stop

—￿+

On/Off

Figure 3

6