Head
Release
Button
LED Display
START/STOP Button
Speed
Control
Buttons
ON/OFF
Button

MIXING (Continued)

4.With Beaters, Cookie Dough Hooks, or Whisk properly in place, press Head Release Button while pivoting Mixer Head downward until it rests firmly in place. See Figure 4.

5.Gently pull plug and power cord out from rear of unit. See Figure 5. Pull power cord to desired length only. DO NOT allow any extra cord length than necessary. Plug power cord into a standard 120V AC household electrical outlet.

R

16 SPEED MIXER

Start

Stop

—￿+

On/Off

Release

16 SPEED MIXER

Start

Stop —￿+

On/Off

Figure 4

Figure 5

CONTROL PANEL

6, Press ON/OFF Button once. The number "1" will flash green in the

LED Display. This indicates the Mixer is turned ON and in Standby Mode. If the LED does not

illuminate, the Mixer is not in Standby Mode. Press Power ON/OFF Button a second time to re-set the

Mixer.

7. Press either of the Speed Control Buttons to increase (+) or decrease

(-) the mixing speed. See Recommended Speed Guide on

page 11 for detailed information. Press Speed Control Button once to

change speed by one setting. Hold Speed Control Button down to increase

or decrease speed rapidly.

7