MIXING (Continued)

NOTE: Always start mixing with a slow speed setting. Then, increase the speed setting to match consistency of the ingredients.

8.Press START/STOP Button once to begin mixing. The LED will stop flashing and show the speed setting in a constant green.

Upon start-up, the Mixer Motor starts slowly and gently increases its speed to the selected speed setting. This prevents ingredients from splattering.

Additional ingredients can be added slowly to the Mixing Bowl during operation.

NOTE: Never fill the Mixing Bowl(s) more than half full.

CAUTION: Keep hands, hair, clothing, as well as utensils out of Mixing Bowl and away from Attachment during operation to reduce the risk of sever injury to persons or damage to the Stand Mixer.

9.Press either Speed Setting Button to increase speed setting (+) or decrease speed setting (-) as desired.

10.Press START/STOP Button once. The Speed Setting will flash and the Mixer will change to Standby Mode. The Mixer will stop mixing and stay in Standby Mode (speed setting will flash). Use a rubber or plastic spatula to scrape sides and bottom of Mixing Bowl, as desired. Press START/STOP Button once to continue mixing until ingredients reach the desired consistency.

CAUTION: DO NOT scrape sides or bottom of Mixing Bowl while Mixer is in operation.

11.Once all ingredients have reached the desired consistency, press START/STOP Button to stop mixing. The green LED will flash to indicate the Mixer is in Standby Mode.

12.Press ON/OFF Button to turn the Mixer OFF.

13.Remove plug from electrical outlet. Gently tug the cord to fully retract the cord into the Mixer Stand.

14.Press the Head Release Button and carefully raise the Mixer Head.

See Figure 6.

TILT RELEASE

16

14

12

10

8

6

4

2

START

STOP

LOW HIGH

ON/OFF

Figure 6

8