Setup
HDMI
•If your TV is not compatible with compressed
•If your TV is not compatible with PCM sampling rates over 48kHz, the player may output 48kHz downsampled PCM audio even though you set PCM Downsampling to Off.
•Cinema : Outputs
•Music : Outputs
✎NOTE
▪If you are using an HDMI receiver, this option is available when you set Digital Output setup to PCM.
▪You can use this option with analog 7.1ch output when you don't use HDMI receiver.
Dynamic Range Control
You can listen at low volumes but still hear dialog clearly.
This is only active when a Dolby Digital signal is detected.
•Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack.
• Off : Turn Dynamic Range Control off.
•On : Choose to listen to a movie at a lower volume without losing clarity of dialog.
Downmixing Mode
Select whether to downmix the
•Normal Stereo : Downmixes the
•Surround Compatible : Downmixes multi- channel audio into surround compatible stereo. Choose when connected to equipment that supports virtual surround functions such as Dolby Pro Logic.
DTS Neo:6
You can enjoy
•Off : Outputs a
Speaker Setting
Set the speaker sound to obtain the best possible surround sound.
This menu is available only when you are using 7.1ch analog output.
Settings
Display |
| : |
|
|
| |
Audio | Disc Menu | : |
| Large | ||
System | Front |
|
| |||
Audio Center | : | : | Large | |||
Network | Subtitle | : | : | Large | ||
Language | Surround |
| ||||
Surround Back |
| : | Large | |||
Security | Subwoofer |
| : | On | ||
General |
| Test Tone |
| : | Off |
|
Support | <Change "Select |
|
| 'Return |
Test Tone
•A test tone is sent to L ;C ;R ;RS ;RSB ;LSB ;LS ;LFE in order, so you can make sure the speakers are set up correctly.
•You can activate the test tone only when no discs are in the unit.
•The test tone outputs through the 7.1 channel analog outputs only.
36 English