22
Appendix
PowerSaver
This monitor has a built-in power management system called
PowerSaver
. This power
management system saves energy by switching your monitor into a low-power mode when it
has not been used for a certain amount of time. The available modes are “On,” “Standby,”
“Suspend,” and “Off”.
This power management system operates with a
VESA DPMS
compliant video card
installed in your computer. You use a software utility installed on your computer to set up this
feature. See the table below for details.
Table 1. Power-saving modes
NOTE: This monitor automatically returns to normal operation when horizontal and vertical
sync return. This occurs when you move the computer’s mouse or press a key on the
keyboard.
This monitor is EPA E
NERGY
S
TAR®
compliant and NUTEK compliant when used with a
computer equipped with VESA DPMS functionality.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
State Normal
Operation
Power-Saving Function mode (EPA/NUTEK)
Standby Mode Suspend Mode
Position A1
Power-off Mode
Position A2
Horizontal Sync
Vertical Sync
Video
Active
Active
Active
Inactive
Active
Blanked
Active
Inactive
Blanked
Inactive
Inactive
Blanked
Power
Indicator
Green Amber Amber/Green
Blinking
(0.5 sec interval)
Amber
Blinking
(1 sec interval)
Power
Consumption
140W (Max.)
120W (Nom.) 60W(Nom.) Less than 15W Less than 3W
1100pe6.book Page 22 Tuesday, January 4, 2000 1:46 PM