Samsung 300 Removing the SD memory card, Using a new Card for the first time, Memory capacity

Removing the SD memory card

1.Turn the power off using the power switch.

2.Open the card cover and press the CARD as shown in the image and release.

3. Remove the CARD and close the card cover.

READY

NOTICE

Don’t remove the CARD when the camera status LED(green) is blinking as this may cause damaged data in the CARD.

Instructions on how to use the SD memory card

Using a new CARD for the first time

Before using the CARD, it must be initialized.

Initializing prepares the memory for recording data.

Refer to page 54 for information on [FORMAT].

Memory capacity

When using a 16MB internal memory, the specified shooting capacity will be as follows. (These figures are intended as an indication of expected performance). These figures are approximate as image capacities can be affected by variables such as subject matter.

Recorded image size				Super fine	Fine	Normal
2048X1536 (		)		14	28	42
1600X1200 (		)		22	46	64
1024X768	(	)		46	97	139
640X480	(		)	121	244	488

27