• Resetting the password for the function key lock.
Press MUTE → 1 → 8 → 6 → On. The password will be reset to '0000'. The remote control is required for
resetting the password.
MagicInfoAvailable Modes
PC / BNC / DVI
AV
S-Video
Component
HDMI
MagicInfo
Note
• The operating system for this set only supports English so the other languages might be corr upted on the
screen.
• For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using a separ ate
USB keyboard.
• For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up external
devices only if the LCD Display turns on.
• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the progra m (MagicInfo)
may stop. If you do unplug the cable, restart the system.
• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program
(MagicInfo) may stop.
• To access other sources, press the SOURCE button in MagicInfo.
• The preset password for the LCD Display is "000000".
• The server program's Power-On option works only if the LCD Display's power is completely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down
since this may cause system errors on the LCD Display.
• In the OSD image of MagicInfo, Network mode is the same as Device.
• When using MagicInfo with the MagicInfo Server Program: perform Network mode.
• When using MagicInfo with the device directly connected to LCD Display : execute Device mode.
1.Select Magicinfo in the Source List menu.
2.The MUISetup screen appears. Select the language you want to use.
3.Press the Install button.
If you select Do not show again and click the Install button, the Scheduler screen is displayed after rebooting.