Notational
Power
Installation
Clean
Oth er
When cleaning the monitor c ase or the surface of the CDT, wipe with a
slightly moistened, soft fabric.
Do not clean Flat monitor with water. Use a water-diluted mild
detergent.
(Some detergents contain significant amounts of alcohol-based solvents,
which can damage (color c hange) or crack the monitor case. The
antiglare/anti-static surface coating on the C DT may also be af fected.)
Dilute the deter
g
ent
(
1:10 ratio
)
with water before usin
g
.
Do not spray detergent directly on the monitor.
Use the recommended detergent with a smooth cloth.
zYou can prevent the coated CDT from being dam aged or the
monitor cabinet from being dissolved, cracked or discolored.
zYou can buy a recommended detergent at any Sam sung Service
Center.
If the connector between th e plug and the p in is dusty or d irty,
clean it properly with a dry cloth.
zA dirty connector can cause an electric shock or fire.
Do not set a glass of water, chemicals or any small metal objects
on the monitor.
zThis may cause damage, electric shock or a fire.
zIf a foreign substance gets into the monitor, disconnect the plug
and then contact a service center.