ESPAÑOL
Introducción de la tarjeta
1. Apague la videocámara.
2. Según indica la flecha, inserte la tarjeta en la
ranura CARD (TARJETA), que está en la parte
inferior de la videocámara.
Expulsión de la tarjeta
1. Apague la videocámara.
2. Deslice hacia abajo el botón de expulsión de la
tarjeta y tire de ella.
Nota
Si ajusta el interruptor en la posición M.PLAY,
aparece la última imagen grabada.
- Si no hay ninguna imagen grabada en la
tarjeta, aparecerán en la pantalla las señales
NO STORED IMAGE! y .
No apague la videocámara mientras está
grabando, cargando, borrando o formateando.
Apague la videocámara antes de insertar o de sacar la tarjeta.
De no ser así se podrían perder datos de la tarjeta.
No deje que los terminales de la tarjeta entren en contacto con
objetos metálicos.
No doble la tarjeta.
Después de sacar la tarjeta de la videocámara, guárdela en
una caja blanda para evitar cargas estáticas.
El contenido de la tarjeta se puede estropear o perder a causa
de su uso incorrecto, de la electricidad estática o del ruido
eléctrico. Guarde las imágenes importantes aparte.
Samsung no se hace responsable de los datos perdidos a
causa del uso incorrecto.
Si el cable USB está conectado a la videocámara, los botones
(DELETE), (S.SHOW), (FWD) y (REW) no
funcionan en la modalidad M.PLAY.
ENGLISH
Digital Still Camera mode (VP-D190/D190i only)
Inserting and ejecting the SmartMediaCard Introducción y expulsión de la tarjeta SmartMediaCard
Inserting the card
1. Turn the Power switch to OFF.
2. Insert the SmartMediaCard into the CARD slot
located beneath the camcorder, in the direction
of the arrow.
Ejecting the card
1. Turn the Power switch to OFF.
2. Slide down the Card Eject switch and pull out
the card.
Reference
If you turn the power switch to M.PLAY, the last
recorded image appears.
- If there are no recorded images on the
SmartMediaCard, NO STORED IMAGE!
and will display on the screen.
Do not turn the power off while recording,
loading, erasing or formatting.
Please turn the power off before you insert or eject the
SmartMediaCard.
You could lose data on the SmartMediaCard.
Do not allow metal substances to come in contact with the
terminals of the Card.
Do not bend the Card.
After pulling the card out from the camcorder, please keep the
SmartMediaCard in a soft case to prevent static shock.
The stored contents may be changed or lost as a result of
misuse, static electricity,
electric noise or repair. Save important images separately.
Samsung is not responsible for data loss due to misuse.
If the USB cable is connected to the camcorder, the
(DELETE), (S.SHOW), (FWD), (REW)
buttons are not available in M.PLAYmode.
78
Modalidad de cámara digital de
tomas fijas (solo modelos VP-D190/D190i)