Checking the remote controller

•Point the remote controller towards the remote controller receiver of the indoor unit.

•When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit indicator() appears on the remote controller display.

Remote controller buttons

Before using the functions of the remote controller, you should set the current time. (Refer to p.18)

Remote controller display

SPi

Set the SPi

Smart Saver

Less energy usage makes your space cool between the temperature range of 24°C~30 °C.

Turbo

Operate in auto fan speed to cool quickly.

Temp + - (Luminous Button) Increase/Decrease the temperature by 1 ˚C.

Auto Clean

Auto clean function – Dry inside of the indoor unit to get rid of odor.

d'light Cool

On Timer

Set the On Timer on.

Power (Luminous Button)

Mode

Set one of the 5 operating modes (see pages 14~15 for instructions).

Quiet

Reduce noise generated from an indoor unit during operation.

Air swing

automatically up and down.

Fan (Luminous Button)

such as Auto/Low/Medium/High.

Air swing

(This function is not available for this model).

Set themode on.

Set/Cancel

Wi-Fi

Cancel the timer/

mode.

SMART Air conditioner Network.

2ndF

Switch the function of the button on the remote controller.

Temp/Humi

•Display the room humidity level and temperature value for 5 seconds on the indoor unit display:

-Hi : High (If the relative humidity is 70 %or higher)

-Sd : Standard (If the relative humidity is lower than 70 %)

-For room temperature will be displayed the value.

To silence the beep sound when pressing the button.

Time set

Set the current time

• When you press [2ndF] button, the indicator will be displayed on the remote controller and you can change the functions on the remote controller as listed below.

d'light Cool Temp/Humi, Auto Clean   Time Set function. If you select the function under the button while the function of the button is switched by 2ndF button,

the 2ndF function is canceled.

12 CAUTION

• Make sure that the water does not get to the remote controller.

MAX_ XSA_IBIM_DB98-33747A_E.pdf