mode
Before using good’ sleep mode, set the current time.(For setting current time, refer to the page 18.)
For a comfortable sleep, the air conditioner will operate it Fall asleepSound sleep Wake up from 
mode.
When the air conditioner is on and in cool mode
1. Press the 
button on the remote controller.
controller display.
2. Press the good’ sleep button to set the time.
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from 3 hours ~ 12 hours.
Operating hour can be set from minimum 30 minutes to maximum
12 hours.
Default operation hour is set to 8 hours.
3. Press the Set/Cancel button to active it on.
AM | |
|
Then the air conditioner operates in good’sleep(Cool) mode.
If you don’t press Set/Cancel button within 10 seconds after pressing the
button, the air conditioner will return to previous status. 
indicator on the indoor unit.
Cancel Press the Set/Cancel button once again.
hr. | You can set the desired temperature by 1˚C in the range of 16˚C~30˚C. |
|
|
Fan speed will be adjusted automatically according to the
min.mode.
mode.
Temperature and fan speed changes in
mode
•Fall asleep: Eases you into sleep by dropping the temperature.
•Sound sleep: Relaxes your body and raises your temperature slightly.
•Wake up from 
mode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
mode over 5 hours. You fell disturbed sleep if the | is set too short or long |
because the default is set to |
|
•If the 
mode is set less than 4 hours, the operation will stop at the same time.
If the 
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.
•Recommended set temperature is between 25˚C~27˚C for cooling and 21˚C~23˚C for heating.
17
MAX_
