Setting on timer
3.Press the Set/Cancel button to active it.
On timer indicator stops blinking and reserved time will be displayed for 3 seconds.
If you don’t press Set/Cancel button within 10 seconds after selecting the time the and 
indicator on the indoor unit.
Cancel Press the Set/Cancel button once again.
Additional options available in On timer mode
Adjusting fan speed is not available.
You can adjust the temperature in Auto/Cool mode.
• Only the latest setting timer will be applied between the On T | Timer |
and |
|
simultaneously
• | On timer and O timer setting time should be d | from each other. |
• | Press the Set/Cancel button on the remote controller while timer combination is on. | |
Using the Smart Saver function
This function will set the temperature range limit while the air conditioner is operating in Cool mode.
Press the Smart Saver button on the remote controller while the air conditioner is operating in Cool mode.
|
|
| Smart Saver indicator and air swing indicator appears automatically on the remote |
Smart | Turbo | Quite | controller display. |
Saver |
| ||
|
|
|
If the current set temperature is lower than 24°C, it will automatically raise to 24°C.
Cancel Press the Smart Saver button once again.
• Smart Saver function is only available in Cool mode.
• When Smart Saver function is activated, temperature range will be limited to 24°C~30°C.
by pressing the Smart Saver button again.
•Temperature/Fan speed can also be adjusted (see page 15 for instructions).
•If you press the Mode button while the Smart Saver function is on, it will cancel the function.
19
MAX
_XSA
