![](/images/new-backgrounds/1290124/29012457x1.webp)
Additional Information
Note
| TV Aspect |
| |
|
|
| |
| • Depending on the disc type, some aspect ratios may not be available. |
| |
| • If you select an aspect ratio and option that is different than the aspect ratio of your |
| |
|
| TV screen, the picture might appear to be distorted. |
|
| • If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides |
| |
|
| of picture). |
|
| BD Wise (Samsung Players only) |
| |
|
|
| |
| • When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD |
| |
|
| Wise appears in the Resolution menu. |
|
| • If the player is connected to a device that does not support BD Wise, you can not use |
| |
| • | the BD Wise function. | Settings |
Settings | For proper operation of BD Wise, set the BD Wise option of both the player and the TV to | ||
| On. |
|
Digital Output
•Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
•If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby digital, DTS), the audio signal outputs as PCM.
•Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
•Some
•This Digital Output setup does not affect the HDMI audio output to your TV.
It affects the coaxial and HDMI audio output when your player is connected to an AV receiver.
•If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).
PCM Downsampling
•Even when PCM Downsampling is set to Off, some discs will only output downsampled audio through the coaxial digital outputs.
•HDMI
•What is a valid certificate?
When the player uses
•The Internet connection may be restricted while you are using
Anynet+(HDMI-CEC)
•Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
•This function is not available if the HDMI cable does not support CEC.
•If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
BD Data Management
•In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback.
•Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster read/write speed.
•The Resume Play function may not work after you format the storage device.
•The total memory available to BD Data Management may differ, depending on conditions.
07 Appendix