Samsung BD-P1000/XEH Unpacking, Accessories, Setting the Remote Control, Getting Started, English

Unpacking

Accessories

Check for the supplied accessories below.

Component Cable	Composite (Video),
	Audio L/R Cable

HDMI Cable

Batteries for Remote	Remote Control
Control (AAA Size)

Instruction Manual Quick Guide

Setting the Remote Control

You can control certain functions of another manufacturer’s TV with this remote control.

Control function buttons include: TV STANDBY/ON,

PROG , VOL + -,TV MUTE, INPUT SEL. button.

To determine whether your television is compatible, follow the instructions below.

1.Switch your television on.

2.Point the remote control towards the television.

3.Press and hold the TV STANDBY/ON button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate number buttons.

Result: If your television is compatible with the remote control, it will switch off.

It is now programmed to operate with the remote control.

■ If several codes are indicated for your television brand, try each one in turn until

NOTE you find one that works.

■If you replace the remote control's batteries, you must set the brand code again.

Getting Started

Preparing the Remote Control

Install Batteries in the Remote Control

•Open the battery cover on the back of the remote control.

•Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.

•Close the battery cover.

If the remote does not operate properly:

•Check the polarity + - of the batteries (Dry-Cell)

•Check if the batteries are drained.

•Check if remote sensor is blocked by obstacles.

•Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

Then you can control the television using the following buttons after pressing the TV button.

Button		Function
TV STANDBY/ON		Used to switch the television on and off.
INPUT SEL.		Used to select an external source.
VOL (+ -)		Used to adjust the volume of the television.
PROG (	)	Used to select the desired channel.
TV MUTE		Used to toggle the sound on and off.

■ The functions listed above will not necessarily work on all televisions. If you encounter

NOTE problems, operate the television directly.

English

English - 15