Samsung BD-P1000/XEG Setting up the Speaker Options, Dynamic Compression, Digital Output, Hdmi

4 Press the …† buttons to select the desired audio option from the options described below, then press the OK or √ button.

5 Press the …† buttons to select the desired item, then press the OK button.

■ Press the RETURN or œ button to return

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

•	Off : You can enjoy the movie with the standard
	Dynamic Range.
•	On : When Movie soundtracks are played at
	low volume or from smaller speakers, the
	system can apply appropriate
	compression to make low-level content
	more intelligible and prevent dramatic

NOTE

to the previous menu.

Press the MENU button to exit the menu.

passages from getting too loud.

Digital Output

•PCM : Select this when your equipment does not decode Dolby Digital.

•Bitstream : Outputs Dolby Digital or MPEG2 or DTS audio as bitstream. Select this when your AV receiver or AV amplifier has a Dolby Digital or MPEG2 or DTS Decoder.

■ LPCM sound track is always outputted as PCM.

NOTE ■ Be sure to select the correct Digital Output or you will hear no sound or a loud noise.

■ When playing a Dolby Digital movie make sure

Setting up the Speaker Options

1 With the unit in Stop mode, press the MENU button.

2 Press the …† buttons to select Setup, then press the OK or √ button.

S

the Digital Output is set to Bitstream.

■ If you have the unit connected via the 5.1

channel analog outputs and play a DVD Dolby

Digital or MPEG2 disc, sound will only be

heard from the Front Left and Right speakers.

■ If you have the unit connected via any analog

output and play a DTS DVD disc, no sound

will be heard. To hear sound, the digital output

BD Player

BD

Title

Music

Photo

Setup

	Setup
Language Setup	√
Audio Setup	√
Display Setup	√
Parental Setup	√

AMemory Card

ystem Setup

must be connected and set to Bitstream.

PCM Down Sampling

•On : Select this when the Amplifier connected to the player is not 96KHz compatible.

In this case, the 96KHz signals will be down converted to 48KHz

•Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case, all signals will be output without any changes.

■Even when PCM Down Sampling is set to Off, some discs will only output downsampled

NOTE audio though the digital outputs.

HDMI

•If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.

•If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down Sampling to On.

MOVE SELECT RETURN EXIT

Press the …† buttons to select Audio Setup, then
3 press the OK or √ button.
	BD Player		Audio Setup
	BD
	Title	Digital Output	: PCM	√
		PCM Down Sampling	: On	√
	Music
		Dynamic Compression : On		√
		Speaker Setup		√
	Photo

Setup

AMemory Card

MOVE SELECT RETURN EXIT

Press the …† buttons to select Speaker Setup,
4 then press the OK or √ button.
BD Player			Speaker Setup
	BD
	L	C	R
	Small		Small
		Small
		LFE
	LS		RS
	Small		Small

ATest Tone

MOVE SELECT RETURN EXIT

English

English - 41