Picture Reset → Reset Picture Mode / Cancel

Screen Burn Protection

Configures the Screen Burn Protection options to prevent and reduce pixel burn.

When an image remains in one position too long, it may cause a permanent burn on the screen.

Preventing Screen Burn-in

To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).

The Time setting allows you to program the time between movement of the picture in minutes.

•• Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after- images on the screen.

NN Optimum condition for pixel shift;

	Item	TV/AV/Component/HDMI

Horizontal	0~4	2

Vertical	0~4	2

Time(min.)	1~4 min.	2 min.

•• Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.

--Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.

--Light: When you set the screen ratio to 4:3, it brightens the left and right sides.

Reducing the Effects of Screen Burn

If screen burn has occurred, you can select scrolling to help remove screen burn artifacts.

•• Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern.

Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

NN The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after- images on the screen. If the after-image is not removed after performing the function, repeat the function again.

NN Press any key on the remote control to cancel this feature.