Samsung BN68-03088A-01 Connecting to an Antenna, Plug & Play Initial Setup, Cable, Touch Control

Getting Started

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically. ✎✎Connecting the power cord and antenna.

VHF/UHF Antenna

Cable

or ANT OUT

Antenna Cable (Not Supplied)

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.

✎✎To return to the previous step, press the Red button.

1	Turn on the TV and
	Touch Control.
2	Connect the Samsung
	Wireless LAN Adapter
3	Selecting a language
4	Selecting Store Demo
	or Home Use
5	Selecting an antenna
6	Selecting a channel
7	ModeSetting the Clock
8	View the HD
	Connection Guide
9	Enjoy your TV.

yy Turn on the Touch Control and then tap OK on your remote.

✎✎It may take about one minute to establish a wireless connection between the TV and Touch Control using the Samsung Wireless LAN Adapter.

yy Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung Wireless LAN Adapter using the method shown on page 35.

yy If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try again.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the desired OSD (On Screen Display) language. Press the ◄ or ► button, then press the ENTEREbutton.

yy Select the Home Use mode. Store Demo Mode is for retail environments.

yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air, Cable or Auto.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the channel source to memorize. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Program (p. 16).

✎✎Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.

yy Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.

yy Manual: Allows you to manually set the current date and time (p. 26). The connection method for the best HD screen quality is displayed.

Press the ENTEREbutton.

If You Want to Reset This Feature...

OO MENU → Setup → Plug & Play → ENTERE

10 English