Setting Date, Time and LevelsSetting date and time

a. Press "MODE" button ("month" starts flashing)

Press "[

]" and "[

]" button to set and adjust the correct

month (1, 2, 3 ....12)

 

b. Press "MODE" button again ("date" starts flashing)

Press "[

]" and "[

]" button to set and adjust the correct

date

 

 

c. Press "MODE" button again ("hour" starts flashing)

Press "[

]" and "[

]" button to set and adjust the correct

hour in 12-hour format. A "PM" will appear for PM and disappear for AM.

d. Press "MODE" button again ("minute" starts flashing)

Press "[ ]" and "[ ]" button to set and adjust the correct minute (00, 01, 02 ...59)

If the batteries have run down or are removed or the adapter has been unplugged, the time and date will have to be reset.

After setting the minute you will automatically be prompted to set the personalized level for Memory Zone 1. The storage of 180 memory readings is divided into 2 memory zones, each maintaining up to 90 memory readings. The following explains how to set your personalized level in each zone.

Your personalized level should be decided between you and your healthcare provider.

Before setting your levels it is important to know: *Your systolic rate is set between 70 and 250 mmHg. *Your diastolic rate is set is between 40 and 115 mmHg.

16Setting Date, Time and Levels