Storing, recalling, and erasing
measurement data
•Erasing data
*Press "MEMORY" into Memory mode.
*Press and hold on "MODE" button and then press " " button, the
When you take a measurement, the monitor automatically stores it in memory space number one. As you continue to take measurements, the monitor will push the previous measurement back one space. In other words, the value in space one will always be the most recent blood pressure measurement taken.
Your monitor features a 2 party memory capability or 2 "zones" - each zone stores 90 measurements each for a total capacity of 180 measure- ments. This feature is useful for a user to track their blood pressure throughout the various periods of the day: morning, afternoon, and night. Press the " " button to toggle between memory zone No.1, and 2. Once you select a zone that you want to view the measurements in, press the "MEMORY" button once to view the most recent measurement along with the time and date that it was taken. Press the "MEM- ORY" button again in succession and you will see all of the measurements registered to that zone. You can then press the " " button to switch to the next zone to view measurements. The monitor will automatically power off after about one minute of inactivity.
*When taking measurements, be sure and select the correct zone number using the " " or " " button so that the measurement is registered to the appropriate zone.
Storing, recalling, and erasing measurement data/2 Zones of 90 Memory 21