*After each measurement, the systolic and diastolic rates, pulse rate and the time & date will be automatically stored. The memo- ry holds data for the latest 90 measurements in each of 2 memory zones. If more than 90 measurements are entered, the memory will automatically clear out the oldest data.
•Recalling data*Press the " " or " " button to select the memory zone.
*Press the "MEMORY" button to get your stored memory data. If there is no data in the memory nothing will appear.
*If there is data in the memory, the first reading will be 
an average of the last three recorded set of measure- 
ments (systolic and diastolic pressure and pulse rate). 
*Press the "MEMORY" button again and the latest 
recorded set of measurements will appear along with 
the recording time and date.
*Press the " " button to read the next set of stored data. The data displayed starts with the most recent reading and continues backwards to the oldest.
*If your memory readings are out of range of your preset personal alert levels, they will flash as explained in Setting Date, Time and Levels.
*No Irregular Heartbeat Detector Record will be stored in memory.
20Storing, recalling, and erasing measurement data