Samsung CLP-550N setup guide Dpi Normal

Problem	Possible Cause	Solution
Printer selects	The paper source	For many software applications, the paper
print materials	selection in the printer	source selection is found under the Paper
from the wrong	properties may be	tab within the printer properties. Select the
paper source.	incorrect.	correct paper source. See page 4.7.
Paper does not	Paper has been loaded	Remove paper from the tray and reload it
feed into the	incorrectly.	correctly.
Printer.		Check that the paper size adjusters are set
		correctly.
	There is too much	Remove excess paper from the tray.
	paper in the paper tray.
	The paper is too thick.	Use only paper that meets the specifications
		required by the printer.
Print job is	The job may be very	Reduce the complexity of the page or try
extremely slow.	complex.	adjusting the print quality settings.
		Adjust the print quality settings, such as
		reducing the resolution. If you set the
		resolution to 1200 dpi (Best) change it to
		600 dpi (Normal).
		Change the port setting to the USB or
		network port to improve the print speed.
		Your printer prints A4-sized paper at 20
		ppm and letter-sized paper at 21 ppm in
		black &white mode. For color printing, A4/
		letter-sized paper prints at 5 ppm.
	If using Windows 9x/	From the Start menu, choose Settings and
	Me, the Spooling	Printers. Right-click the Samsung CLP-
	Setting may be set	550 Series printer icon, choose
	incorrectly.	Properties, click the Details tab, and then
		choose the Spool Settings button. Select
		the desired spool setting.
Half the page is	The page orientation	Change the page orientation in your
blank.	setting may be	application. See page 4.6.
	incorrect.
	The paper size and the	Ensure that the paper size in the printer
	paper size settings do	driver settings matches the paper in the
	not match.	tray.

7.4 SOLVING PROBLEMS